|
|
Technological stage of the rough substructure of the multifunctional building Vlněna in Brno
Janíček, Peter ; Doubek, Rostislav (referee) ; Kantová, Radka (advisor)
Bachelor thesis deals with the realization of rough substructure for multifunctional building Vlněna in Brno. It is two storey basements founded in complicated subsoil. Thesis contains draft, adaptation and comparison of variable technological solutions of the chosen phase, technical report of the chosen technological phase, the block plan drawing of transportation roads, location drawing and the technical report of the building site equipment, the technological regulations of monolith reinforced concrete structures, the inspection and testing plan for monolithic structures, the machine set designing, the occupational safety and health care, the cost estimation budget with bill of quantities, the time schedule, the scheme of critical concreting and applicability diagram of tower cranes.
|
|
|
Multifunctional Building Brno - Mlýnská
Hrubý, Libor ; Matoušková, Ilona Kalivodová (referee) ; Kalousek, Lubor (advisor)
Diploma thesis deals with a new built multifunctional building in Brno on Mlynska street. The intention is to change of use of lucrative corner site brownfield. The new building has four aboveground floors and one underground floor. The ground floor will have small restaurant and two separated shopping units. The second floor is divided into three office spaces. The third and fourth floors are designed as flats of different categories. The underground floor will be used for storage spaces, boiler room with separate pellet storage and parking shaft system. Construction system is designed as a wall construction system made of sand-lime bricks. Ceiling constructions and staircases are designed as a cast-in-place concrete. The building is roofed with the flat green roofs and terrace, which will be used for relaxation of residents.
|
|
|
Multifunctional House - project planning and management of construction
Krč, Jan ; Diaz, Yvetta (referee) ; Vlčková, Jitka Laura (advisor)
This master´s thesis deals with project planning and management of construction of multifunctional building. The main part of thesis are budget of object and schedules of work, which contain realization of reinforced concrete structure and other related works. Another part of thesis deals with the technical regulations about the implementation of horizontal and vertical parts of reinforced concrete structure and from finishing works about realization of inside plasters. Following this part there is design and schedule of using of appropriate building machines and small machinery for their implementation, design of site equipment, quality assurance of works performed, safety of work and minimization of environmental impact. The thesis contains also proposal of contract of work. This work does not deal with substructure of multifunctional building, because this is solved in bachelor thesis.
|
|
|
Multifunctional building Brno - Líšeň
Rudolecká, Anna ; Fišer, Jiří (referee) ; Odvárka, Antonín (advisor) ; Pěnčík, Jan (advisor)
Bachelor thesis examines the creation of individual stages of project documentation to the study of the new building from subject AG035. The project deals with the new multifunctional house located in the district Lisen on the plot of land p. No. 4418/1 in the cadastral territory of Brno. The plat is situated on a sloping terrain. The project takes into account solving of surrounding areas as well, particularly in front of the area and connection to the public transport infrastructure. The mass of the object consists of four large blocks. Two of them are double-storey and two are single-storey. Blocks are interconnected by a glass tunnel, set on a symbolic pedestal. The pedestal is formed from two recessed floors of underground parking. The object is four-storey with two overground floors, which are mostly commercialized in the form of lettable spaces (e. g. for business, services, administration, etc.). Another part of the floors is used for technical and hygienic facilities. Two underground floors can be used by employees and visitors for car parking. Access to these floors is provided by a car lift, personal lifts and two stairs that connect all floors. The principle of the draft consists in the intention to place the mass of the building in the environment in the most sensitive way, so that the building doesn't act heavily, such as the surrounding settlement, but naturally follows the surrounding two-storey houses. That was achieved by the material solution of the above-ground floors. Five materials prevail in the exterior. Extensive vegetative roof, face concrete, two types of fitted facades (DuPontTM Corian® facade panels + glass panels with a sign symbolizing the crowns of trees and shrubs; other types of facade are vertical metal lamellae). Another predominant material is glass, which is used for the interconnection tunnel and the north and south facade.
|
|
|
Multifunctional building Brno - Líšeň
Zemánek, Pavel ; Fišer, Jiří (referee) ; Odvárka, Antonín (advisor) ; Pěnčík, Jan (advisor)
Subject of this bachelor´s thesis is to develop project documents of multifunctional building in Brno – Líšeň. The building has 2 floors and 2 underground floors. On the first floor there are leasable spaces (shops). On the second floor there are leasable spaces (office, doctors). On the first underground floor there are also leasable spaces (office, doctors). On the second underground floor there is car parking. The netrance do the parking floor is secured by outdoor ramp. Structural systém of building is cast-in-place rainforced concrete. The building is based on simple fundation pads and strip foundations. An internal staircase is cast-in-place reinforced concrete. The roofs of the building are designed as warm flat roofs.
|
|
|
Heating multifunctional building
Čajčíková, Jolana ; Horák, Petr (referee) ; Počinková, Marcela (advisor)
The theme of this bachelor´s thesis are problems of condensing gas boiler rooms in the theoretical part and heating multifunctional building in the calculation part. The four-floor multifunctional building is situated in Brno in a slightly built-up area and includes commercial units, classrooms and administrative units for rent, an IT company and a restaurant for 120 people situated in the fourth floor. The heat source for this building is a gas condensing boiler room. The heating surface consists of steel panel radiators. There is forced ventilation installed in the building.
|
|
|
Construction Project for Implementation of Multifunctional Building in Brno
Čačaný, Lukáš ; Venkrbec, Václav (referee) ; Nečasová, Barbora (advisor)
The main subject of this diploma thesis is a construction technological project of preparation and realization multifunctional building in Brno on Trugeněvova street. It is a new construction of the main building. It provides a technical report on the construction technology project, transport relations for the transport of materials and machinery to the construction site, following technical report of construction site equipment, construction technology study, design of machinery and last but not least elaboration of technological regulation for the execution of monolithic structures. Furthermore, the chapters on health and safety protection at work on the construction site, as well as the LEED certification system and the financial and time plan of the selected stage are elaborated.
|
|
|
Polyfunction house Křenová
Láníková, Jaroslava ; Boháč, Ivo (referee) ; Šindlar, Jiljí (advisor) ; Pěnčík, Jan (advisor)
The multifunctional house is a part of the row of buildings lining the Krenova street. This house closes the whole line of buildings, so all the houses together create a functional unit. This multifunctional building is devided into three functional parts – a museum, an administrative part and flats. The centre of the building is used as a relaxing area – the atrium. The principle of the design is based on a simple line of block materials connecting to each other. In the front of the house, which is facing the Krenova street, will be situated the museum. The front facade is made of black and white tiles and decorated by a glass ashlar. A second glass ashlar is situated on the east side of the building – the administrative part. This east side will be visible from the newly planned town cirquit. The area in between this cirquit and the multifunctional house will be made into park and will use as a place for relaxation. The flats are situated into the quiet part of the street Skorepka
|
|
|
Multifunctional building Kuřim
Niesnerová, Lada ; Párová,, Jitka (referee) ; Rusinová, Marie (advisor)
Free-standing multi-functional building with five floors, partial basement with monotube flat roof. The building is designed for use permanent housing, medical offices and office. The construction is solved as a system construction company Velox. Thermal insulation is part of Velox.
|
|
|
Multifunctional Building
Marášek, Martin ; Myslín, Jiří (referee) ; Maceková, Věra (advisor)
The diploma thesis deals with design documentation of a multifunctional building. The new building is located in a town Uherský Brod in Uherské Hradiště district. The house is situated on a gentle sloping land. The new building is divided into café, drugstore and eight flats. The masonry are designed from Porotherm system. The roof is warm flat roof.
|
guest ::
